Quick take
Choosing an FFC/FPC adapter for computers peripherals work comes down to a strict fit question: pin count and header arrangement must match the connection you are building. The four choices cover 10-, 24-, 28-, and 30-pin formats, with male, female, and right-angle header arrangements represented. Listed prices span $13.37 to $21.06, a $7.69 spread, so price is a useful secondary separator once the configuration is settled.
All four are listed as new cable connectors and use a double-sided board with a single flat-cable socket. Start with the required connector format, then use the board dimensions and listed price to narrow the choice.
Listed price comparison
| Adapter | Listed price | Price position |
|---|---|---|
| FFC FPC Connector Board 30 Pins Double Row Male Pin Header Strip Adapter | USD 14.22 | |
| FFC FPC Connector Board 28 Pins Double Row Right Angle Pin Header Adapter | USD 19.50 | |
| 2pcs FFC FPC Connector Board 24 Pin Double Row Female Header Strip Adapter | USD 21.06 | |
| 2pcs FFC FPC Connector Board 10 Pin Double Row Right Angle Pin Header Adapter | USD 13.37 |
Decision matrix
- Need a lower-count right-angle arrangement: choose the 10-pin Zaplyte board.
- Need a higher-count right-angle arrangement: choose the 28-pin uxcell board.
- Need a female header strip: choose the 24-pin Zaplyte two-piece option.
- Need a male pin-header strip: choose the 30-pin uxcell board.
- Working around board space: the listed overall dimensions range from 33 x 20 mm to 34 x 26 mm, 26 x 40 mm, and 33 x 40 mm depending on the configuration.
Product notes
FFC FPC Connector Board 30 Pins Double Row Male Pin Header Strip Adapter
At USD 14.22, the uxcell board is a focused choice for a build specified for a 30-pin double-row male pin-header strip. Its description identifies a double-sided board with a single flat-cable socket, while the 26 x 40 mm overall size gives the format a defined footprint. This is also one of the lower-priced entries in the comparison. Its limitation is built into the design: the male-header arrangement serves a different endpoint than the female-header and right-angle alternatives. Pick it when the required interface calls specifically for the listed male strip format.
FFC FPC Connector Board 28 Pins Double Row Right Angle Pin Header Adapter
The uxcell 28-pin right-angle board is listed at USD 19.50 and suits a connection plan that specifically calls for that higher-count right-angle configuration. It uses the same 0.5 mm FPC socket-side pitch, 1.0 mm FPC back-side pitch, and 2.54 mm DIP pitch described across these boards. Its 33 x 40 mm overall size is the largest footprint listed here, which makes it a more defined choice for a layout that can accommodate that format. The trade-off is specificity: it is for the 28-pin right-angle requirement, not the other header styles in the group.
2pcs FFC FPC Connector Board 24 Pin Double Row Female Header Strip Adapter
For a female-header-strip requirement, the Zaplyte 24-pin adapter is the direct match, and its title identifies a two-piece quantity. At USD 21.06, it is the highest-listed-price option in this comparison. The stated 34 x 26 mm overall size is relatively wide and short compared with the taller layouts shown by the 30-pin and 28-pin boards. Choose this option when both its female header arrangement and 24-pin format align with the intended connection. Its constraint is equally clear: it is not the alternative for a male strip or either right-angle configuration.
2pcs FFC FPC Connector Board 10 Pin Double Row Right Angle Pin Header Adapter
At USD 13.37, the Zaplyte 10-pin right-angle adapter has the lowest listed price of the four. Its two-piece title and 33 x 20 mm overall dimensions make it the most compact listed board footprint in the group. The shared connector specifications include a 0.5 mm FPC socket-side pitch, 1.0 mm back-side pitch, and 2.54 mm DIP pitch. Choose it when the connection calls for the listed 10-pin double-row right-angle format. The limitation is its narrow specialization: the pin count and right-angle header treatment do not replace the 24-, 28-, or 30-pin options.
Final recommendation by use case
Select the 2pcs FFC FPC Connector Board 10 Pin Double Row Right Angle Pin Header Adapter for a 10-pin right-angle setup and the most compact stated footprint. Move to the FFC FPC Connector Board 28 Pins Double Row Right Angle Pin Header Adapter when the required right-angle format has the higher pin count. For a female header strip, the 2pcs FFC FPC Connector Board 24 Pin Double Row Female Header Strip Adapter is the clear configuration match. Choose the FFC FPC Connector Board 30 Pins Double Row Male Pin Header Strip Adapter when a 30-pin male pin-header strip is the required endpoint.
